In the large majority of the cases, buying professional plumbing services to fix your bathtub drain will only complicate things. If you have ever hired a plumber you probably know what I mean.
The best way is to fix your drain on your own and the best part about it is that it isn’t even hard. But before going there, you need to know what type of bathtub drains you have.
Table of Contents
Types of Bathtub Drains to Fix
There are generally two types:
With Trip Levers
Those with trip levers come in two different options:
- Plunger – You open the trip lever by manipulating the plunger.
- Pop-up – You use the stopper to open the trip lever
Without Trip Levers
Those without trip levers are three types:
- Lift and turn – The water gets eliminated by rotating a plug.
- Foot lock – Use your foot to manipulate the drain
- Roller Ball – The plug gets pushed or pulled for different effects
It is important to know what type of bathtub drain stopper you have, so you know how to open it. On a more important note, you will get the know-how on how to clean and fix it properly.
How to Chuck Out from Clogging
In 99% of the cases, clogging is the problem you need to deal with. This is true for both bathtubs and best toilet flush valve. The problem becomes more drastic if you don’t clean your drain regularly. In these cases, you need to approach the whole cleaning process in great detail. Here are some key steps to follow for a thorough cleaning:
Dismantle and cleanse
First, you need to remove the strainer. That is where a lot of the filth accumulates and clogs the drain. After that, pull out the stopper and proceed to clean the shallow part of the drain of all the residues, hair soap gunk and whatever else you might find. Bathtub faucet diverter is also important when you are on a mission to fix the bathtub drain.
Drain claw comes next
This device is simple to use and it is perfect in coping with all types of sediments, especially hair deposits. Just push the drain stick as far deep as you can and pull it out, removing all the dirt. After repeating the process several times, test the drain to see if it works. If it does, you are a genius. If not, time for the next step.
Go for chemical cleaners
The most effective ones are those based on sulfuric acid and potassium hydroxide. Read the instructions carefully, use protective gloves and pour some cleaner into the drain. Wait for about 15 to 30 minutes to take effect and flush it with cold water.
The process is simple and effective. You pour half a cup of baking soda and one cup of vinegar down your drain. The chemical reaction should dissolve the gunk in about 20 minutes.
Toilet plungers are an effective non-invasive method. Also, you might want to thoroughly clean your strainers and stoppers before anything else. Your problem just might be on the surface.
You don’t need a plumber for a fast and efficient job. All you need is your two hands and a bit of knowledge and I have successfully delivered the last part.